HOME  |  ABOUT OUR PRODUCTS  |  ONLINE STORE  |  NEWS  |  WHY BUY EMOTIVA?  |  FAQs  |  REVIEWS  |  FEEDBACK  |  SUPPORT/CONTACT US  |  FORUM
MMC-1
Audio-Video Processor

RSP-1
Stereo Preamplifier
MPS-2
7 Channel Amplifier
XPA-5
5 Channel Amplifier
XPA-3
3 Channel Amplifier
XPA-2
2 Channel Amplifier

LPA-1
7 Channel Amplifier
ERM-1
LCR Reference Monitors

ERD-1
Surround Speakers

PRODUCT ARCHIVES
ACCESSORIES
 


Emotiva Reference Monitor
$299 (single speaker)

ONE SALE THROUGH JULY 6TH: $229 EACH

Our new line of cinema reference monitors are made in cooperation with speaker design guru Vance Dickason, author of the renowned 'Loudspeaker Design Cookbook.'

Featuring hand finished black satin lacquer cabinets, brushed billet aluminum faceplates and magnetically attached grills, these speakers have an elegant finish that creates a clean, modern look which lends itself to any system or room.

The ultra long-throw, tri-fiber cone woofers and silk dome tweeters (with integral heat sinks for increased power handling) are custom made for Emotiva. The crossovers utilize high quality aircore inductors and metal film capacitors. The five way binding posts, also mounted on a billet aluminum plate, provide a secure and long-lasting connection.

The cabinets are heavily braced and critically damped for low resonance, and the tweeter level and boundary compensation controls allow you to fine tune highs and mid-bass responses to suit your room.

The Emotiva ERM-1 is an exceptional loudspeaker delivering a clear, rich sound and detailed sound...with striking looks and features at an unheard of price…only $299 each.


Drivers

  • 2) 5.25” woofers
  • Proprietary tri-fiber composite cone is light weight and rigid with low resonance
  • NBR surround for enhanced cone edge termination
  • Proprietary high performance motor structure
  • Integrated copper and aluminum shorting rings to reduce distortion and 2nd and 3rd order harmonics
  • Flat progressive rate spider with venting under spider
  • Cast aluminum frame
  • 25mm tweeter
  • Wide surround silk dome diaphragm
  • High power motor structure
    integrated heat-sink mounted on motor structure
  • Ferro-fluid cooled voice coil
  • Internally damped, low resonance rear chamber
  • 4 ohms

Dimensions:

  • 9.5" deep
  • 7.75" wide
  • 13.5" tall

Precision Crossover

  • Asymmetrical 4th order Linkwitz Riley crossover
  • Switchable tweeter level adjustment (+2, 0, -2db)
  • Switchable boundary effect Compensation
  • Precision metal film capacitors
  • Low DCR air core inductors

Additional Features

  • Dual speaker terminals for bi-amped operation
  • Critically braced and highly damped MDF cabinet
  • Milled terminal recess  with integrated
  • Milled aluminum 6mm jack plate
    6mm milled aluminum low diffraction front baffle plate
  • Magnetically mounted, acoustically transparent grill
  • Non-reflective black satin lacquer finish
  • Frequency response: 80-20Khz +/-2db
  • Offset array with optimized horizontal and vertical polar response. Speaker can be mounted vertically for left or right main channels, or horizontally as a center channel
  • Sensitivity: 89db (2.83volts @ 1 Meter)
  • Recommended amplifier power: 50-250 Watts RMS

Note:
The ERD-1s/ERM-1s arrived before their manuals were completed. Rather than delay shipment, we have shipped speakers to those who purchased them, and will be mailing the manuals to follow as soon as they are ready. Emotiva 'E' logo buttons that attach to the speaker grills will be shipped along with the manuals.

We hope the speakers are fairly self-explanatory, and a manual is not crucial for setup. If you have any questions, do not hesitate to call us at: 1-877-EMO-TECH.

There are, however, several important notes on wall mounting the ERD-1s, and we have prepared a list (with photos) that can be accessed at the link below:

INSTALLATION NOTES FOR THE ERD-1

click any image for a larger view
 
 
 


all contents ©2008 Emotiva Audio Corporation
“Emotiva” and the Emotiva “E” are trademarks of Emotiva Audio Corporation